西昆仑地区塔木MVT型铅锌矿床成矿作用和成矿物质来源探讨   总被引：6，自引：0，他引：6  

匡文龙  高珍权  印建平  朱自强  刘石华 《矿物岩石地球化学通报》2002,21(4):253-257

MVT型铅锌矿是西昆仑地区重要的铅锌矿床类型之一.为了探明西昆仑地区该类型矿床的成矿作用过程和成矿物质来源,本文以塔木矿床为例,在野外调研基础上,进行了光片鉴定、铅硫同位素、稀士元素和成矿元素研究,得到矿石中方铅矿的δ34SCDT为-5.04‰～+3.67‰,反映出油田卤水与深层卤水的混合特征;由铅同位素分析结果计算出表面年龄为461～481 Ma(早于泥盆纪438～410 Ma);由稀土元素分析数据得出岩(矿)石/球粒陨石标准化分配模式图表明,成矿物质主要来自地层.因而判定主要成矿物质可能来源于前泥盆系地层.喜马拉雅期逆冲推覆构造作用所引发的大规模热卤水运移、循环过程,导致矿质的进一步富集、沉淀.  相似文献   

Physical and chemical dynamics of temporary ponds on a calcareous plateau in Thuringia, Germany     

Jens Arle   《Limnologica》2002,32(2)

  相似文献   

川西成都盐盆平落4井富钾硼溴浓卤水水化学同位素地球化学特征及形成机制   总被引：4，自引：0，他引：4  

宋鹤彬 《地球学报》1997,18(3):282-289

根据盐盆的演化历史，水化学组分Ｈ，Ｏ，Ｓ，Ｂ等同位素组成综合分析，该浓卤水具有海，陆相混合型卤水的特征，一些元素的富集是在成盐成卤晚期由外来卤水和地层水流入盐盆混合并溶解盐层，在蒸发条件下形成的。  相似文献   

察尔汗盐湖钾盐矿床与晶间卤水分异的关系     

徐少康 《盐湖研究》1996,4(2):64-69

通过钾盐矿床与晶间卤水分异特征及成因的分析对比，认为晶间卤水分异的过程也就是钾盐矿床形成的过程。胶结浸染状固体矿形成于晶间卤水分异初期的浓缩阶段，改造于分异后期的淡化阶段；晶间卤水矿和层状固体矿形成于淡化阶段。  相似文献   

四川成都盆地某深层富钾卤水的地球化学特征及成因   总被引：7，自引：0，他引：7  

黄思静  曾允孚 《沉积学报》1997,15(3):67-71

本文报道了四川成都盆地某深层富钾层卤水的化学组成，氧、氢、硫和硼同位素组成以及２５℃等温蒸发析盐过程中，从卤水中获得的固相物质组成。在此基础上讨论了卤水的成因，认为该卤水是蒸发浓缩的海相卤水、非海相卤水以及埋藏成岩过程中封存卤水对地层中海相蒸发盐溶滤作用形成的混合水。  相似文献   

能量色散X射线荧光光谱法测定卤水中痕量溴铷砷   总被引：3，自引：4，他引：3  

樊兴涛  詹秀春  巩爱华 《岩矿测试》2004,23(1):15-18

用模拟卤水建立了能量色散X射线荧光光谱法测定卤水中溴、铷、砷痕量元素含量的方法.实验表明,方法可以直接取样测定,适用于大批量样品的测试分析.方法的精密度RSD(n＝15)小于1%,加标回收率为86.8%～101.6%.卤水中溴、铷、砷的测定结果与比色法、原子吸收和原子荧光法结果相符.  相似文献   

Microthermometric measurement of fluid inclusions and its constraints on genesis of PGE-polymetallic deposits in Lower Cambrian black rock series, southern China   总被引：2，自引：0，他引：2  

WANG Min 《中国地球化学学报》2005,24(4):297-305

Systematic microthermometric measurements of fluid inclusions in the PGE-polymetallic deposits hosted in the Lower Cambrian black rock series in southern China were performed, and the results suggest: (1) there exist two types of fluid inclusions. TypeⅠis of NaCl-H2O system with low-medium salinity, and its homogenization temperatures (Th) and salinities are 106.9- 286.4℃ and ( 0.8- 21.8) wt%NaCl eq. respectively; TypeⅡ is of CaCl2-NaCl-H2O system with medium-high salinities, and its homogenization temperatures and salinities range from 120.1℃ to 269.6℃ and ( 11.4- 31.4) wt%NaCl eq., respectively. The typeⅡ fluid inclusions have been discovered for the first time in this kind of deposits; (2) two generations of ore-forming fluids were recognized. Characteristics of fluid inclusions in the PGE-polymetallic ores and carbonate-quartz stockworks in the underlying phosphorites are almost of no difference, they may represent ore-forming fluids at the main metallogenic stage. The peak value of homogenization temperature of those fluid inclusions is about 170℃, while their salinities possess a remarkable bimodal distribution pattern with two peak values of (27-31) wt%NaCl eq. and (4-6) wt%NaCl eq. On the contrary, fluid inclusions in the carbonate-quartz veins in the hanging wall may represent ore-forming fluids at the post-metallogenetic stage. The homogenization temperatures and the peak values of salinities are mostly 130-170℃ and (12-14) wt%NaCl eq., respectively; (3) nobel gas isotopic composition analyses in combination with the microthermometric measurements of fluid inclusions suggest that the ore-forming fluids at the main metallogenetic stage were probably derived from mixing of basinal hot brines with the CaCl2-NaCl-H2O system and seawater with the NaCl-H2O system; (4) in the Early Cambrian, the basinal hot brines were trapped in the Caledonian basins, which were distributed along the southern margin of the Yangtze Craton, and where giant thick sediments were accumulated, and expelled and migrated laterally along the strata because of the pressure caused by overlying sediments. The basinal hot brines absorbed Ni, Mo, V, PGE from the surrounding rocks and were transformed into ore-bearing hydrothermal fluids with the CaCl2-NaCl-H2O system and medium-high salinities, then ascended along faults and mixed with seawater of the NaCl-H2O system, and finally PGE-polymetallic deposits or occurrences were formed in the black rock series.  相似文献   

Primary Ore Mineral Assemblage and Fluid Inclusion Study of the Batu Hijau Porphyry Cu-Au Deposit, Sumbawa, Indonesia   总被引：3，自引：0，他引：3  

Akira Imai  Satoshi Ohno 《Resource Geology》2005,55(3):239-248

Abstract. The Batu Hijau porphyry Cu‐Au deposit, Sumbawa Island, Indonesia, is associated with a tonalitic intrusive complex. The temperature‐pressure condition of mineralization at the Batu Hijau deposit is discussed on the basis of fluid inclusion microthermometry. Then, the initial Cu‐Fe sulfide mineral assemblage is discussed. Bornite and chalcopyrite are major copper ore minerals associated with quartz veinlets. The quartz veinlets have been classified into ‘A’ veinlets associated with bornite, digenite, chalcocite and chalcopyrite, ‘B’ veinlets having chalcopyrite bornite along vuggy center‐line, rare ‘C’ chalcopyrite‐quartz veinlets, and late ‘D’ veinlets consisting of massive pyrite and quartz (Clode et al., 1999). Copper and gold mineralization is associated with abundant ‘A’ quartz veinlets. Abundant fluid inclusions are found in veinlet quartz consisting mainly of gas‐rich inclusions and polyphase inclusions throughout the veinlet types. The hydrothermal activity occurred in temperature‐pressure conditions of aqueous fluid immiscibility into hypersaline brine and dilute vapor. The halite dissolution (Tm[halite]) and liquid‐vapor homogenization (Th) temperatures of the polyphase inclusions in veinlet quartz range from 270 to 472d?C and from 280 to 454d?C, respectively. The estimated salinity ranges from 36 to 47 wt% (NaCl equiv.). The apparent pressures lower than 300 bars are estimated to have been along the liquid‐vapor‐halite curve for the fluid inclusions having the Th lower than the Tm that trapped the brine saturated with halite, or at slightly higher pressure relative to liquid‐vapor‐halite curve for the fluid inclusions having the Th higher than the Tm that trapped the brine unsaturated with halite. The actual temperature and pressure during the hydrothermal activity at the Batu Hijau deposit are estimated to have been around 300d?C and 50 bars. At such temperature‐pressure conditions, the principal and initial Cu‐Fe sulfide mineral assemblages are thought to be chalcopyrite + bornite solid solution (bnss) for the chalcopyrite‐bearing assemblage, and chalcocite‐digenite solid solution and bnss for the chalcopyrite‐free assemblage.  相似文献   

陆相红层型铜铅锌矿床与红层盆地热卤水成矿作用   总被引：1，自引：1，他引：0       下载免费PDF全文

杨兵 《中国地质》2018,45(3):441-455

新疆乌恰县乌拉根超大型铅锌矿是中国发现的首个产于陆相红层盆地中的红层型铅锌矿床,对其成矿作用及成因有多种不同认识,但都将其归入现有的一些矿床类型,如喷流沉积型、砂岩型等,却均不能反映其独特的成矿环境与成矿作用。为此,在广泛收集和研究全国陆相红层盆地及其矿产的地质资料基础上,通过区域地质构造背景、含矿建造、矿床特征、控矿因素、成矿物质来源、成矿流体等方面对比分析,认为乌拉根铅锌矿与中国大量产于陆相盆地内红色建造中的红层铜矿,在矿床特征、控矿条件、矿床成因等方面具有高度的一致性,均为陆相红层盆地热卤水作用的结果,是同一类型的矿床。红层型矿床是地洼区的特有矿产,是地球地质演化到地洼阶段才出现的新的矿床类型,陆相红层盆地热卤水作用是一个完全独立的成矿系统,因此将其作为一个单独的矿床类型——红层型矿床是合理的,既具有重要理论意义,也具有重要的实践意义,为铅锌矿找矿开辟了新的方向和领域。  相似文献   

柴达木盆地一里坪盐湖富锂卤水特征、储层物性及富水区分析     

赵艳军  焦鹏程  汪明泉  张大义  朱振光  胡宇飞 《地质学报》2021,95(7):2062-2072

一里坪盐湖是柴达木盆地中一个典型的富锂卤水矿床,具有重大的经济价值.本文以查明盐湖深部卤水分布为目的,从卤水储层的空间分布特征和储层物性的角度对富水区进行预测,为卤水开发提供依据.研究区位于一里坪成盐盆地沉积中心区域,晚更新世末期以来,以沉积浅湖相的含淤泥和黏土粉砂岩,盐湖相的含粉砂和黏土的石盐岩为特征.在垂向上,由上下两套石盐岩夹中部粉砂岩组成一里坪富锂卤水的储层;平面上,研究区北部主要为浅湖相,往南过渡为盐湖相,石盐岩厚度在东南部最大.对储层厚度、孔隙度和给水度的分析表明,第Ⅱ矿层孔隙型和晶间型卤水优质储层均位于研究区东部,可作为卤水资源勘查开采的重点区域.  相似文献